1.  What is Moorebot Zeus Robot used for?

Moorebot Zeus Robot is a fighter robot specifically designed for robot competition.

2.  How do I control Moorebot Zeus Robot?

Moorebot Zeus Robot is controlled via remote controller through bluetooth. For more information, do visit our YouTube channel: https://www.youtube.com/c/moorebotrobot 

3. Is Moorebot Zeus Robot water-proof?

No. 

4. What is the operating temperature of Moorebot Zeus Robot?

-5~45°C (23~113℉) 

5. How long does the battery last?

On a full charge, the Moorebot Zeus Robot should last for around 50 minutes of playtime. 

6. How do I charge Moorebot Zeus Robot, and how long does it take?

Mooorebot Zeus Robot is charged with a standard power adapter(100~240V), which is included in the package. The battery can reach a full charge again within 100 minutes. 

7. How do I know Moorebot Zeus Robot is in low battery and requires recharged?

When Moorebot Zeus Robot shakes its head left and right, you should recharge the robot. While charging, the light will be red. Charging is complete when the green light turns on. 

8. Can I replace the battery of Moorebot Zeus Robot?

Yes, but only battery provided by Moorebot Zeus is suggested. 

9. Failed to configure the parameters on Robot Servomotor Debugging Software page.

1. Ensure the servo motor is powered by battery.

2. Ensure the USB debugger is switched on SERVO MOTOR MODE.

3. Ensure the USB debugger is properly plugged in computer and correct PORT is chosen on Robot Servomotor Debugging Software page. For more information, do visit our YouTube channel: https://www.youtube.com/c/moorebotrobot. 

10. Failed to stand up after the robot is turned on. What should I do?

1. Check the ID of servo motors and ensure they are assembled in position.

2. Ensure the steering gear is correctly plugged in the computer.

3. Ensure the servo motors are in correct angles by connecting the robot with USB debugger and clicking Reset Servo button on programming software page. 

11. How to turn on Moorebot Zeus Robot?

Press the power button on the back of Moorebot Zeus Robot. 

12. What is the shipping weight of Moorebot Zeus Robot?

7.5kg (16.5 pounds) 

13. How to know the servo motor is connected correctly?

Ensure servo motors rolls while sliding the position button on servo motor debugging software page. For more information, do visit our YouTube channel: https://www.youtube.com/c/moorebotrobot. 

14. How to configure/change the ID of servo motor?

Connect the robot with computer through USB debugger. Open the programming software and change the ID number on the page. For more information, do visit our YouTube channel: https://www.youtube.com/c/moorebotrobot. 

15. Some parts fail to perform actions after the robot is turned on. What should I do?

1. If there are some parts become loose or fall off, please ensure the cabling is correct and non damaged.

2. If the servo motor makes a strange “Click Click” sound, change the servo motor. For more information, do visit our YouTube channel: https://www.youtube.com/c/moorebotrobot. 

16. The saved movements cannot be downloaded into the programming software. What should I do?

1. Ensure the robot is on.

2. Ensure the USB debugger is switched on ROBOT MODE.

3. Ensure the USB debugger is properly plugged in computer and correct PORT is chosen on programming software page.

4. Ensure the robot moves while clicking Reset Servo button on programming software page. And then click Initial Pose button. For more information, do visit our YouTube channel: https://www.youtube.com/c/moorebotrobot.